We produce seamless steel pipes since 1890

Member of  

Industries

Applications / Use of products

  • Power production
  • Oil and Gas extraction
  • Product Pipelines
  • Petrochemical
  • Chemical
  • Construction
  • Engineering
  • Marine construction

About us

Valcovny trub Chomutov is a pioneer of the industry with over a century of tradition. The company founded by Mannesmann brothers is the place where the world’s first seamless pipe was created. Today we maintain the tradition using modern technologies to cater for the requirements of our customers all over the world. We focus on production of seamless steel pipes with the OD from 273mm to 660mm and wall thickness from 9.5 to 72mm in grades ranging from simple carbon pipe up to P92.

History

2016

Separation of VTCH

  • The company became an independent entity while maintaining the efficiency due to tight relations with remaining members of Z-Group Steel Holding

1997

VTCH purchased by Z-Group

  • Z-Group acquired VTCH and integrated it into the steel producing holding, together with steel mills in Veselí and Hrádek

1989 - 1994

VTCH after the Velvet revolution

  • The national company “Valcovny trub" has been transformed and sold to private investors

1949 - 1989

VTCH during the early period of socialism

  • Modernisation of the production and portfolio took place and continued until the 1970
  • VTCH became a significant supplier of seamless tubes for the post-war Europe
  • VTCH has been tasked to manufacture the entire steel structure for Czechoslovak hall at EXPO 58 (obrazek 56)
  • From 1970 further innovation allowed production of highest-grade high-alloy pipes and pipes for use in nuclear powerplants

1945 - 1948

VTCH after the WW II.

  • The factory has never been attacked or damaged during the fights, so the production could continue without interruptions
  • The factory has been nationalized and taken over by appointed management on May 12th 1945
  • Further integration into a state-run conglomerate of steel-producing companies has followed

1938 - 1945

VCTH during WW II.

  • The core company and subsidiaries has been merged into one corporation
  • Manufacturing focus shifted towards military production due to war requirements
  • The plant has undergone overall modernization to increase overall capacity of production

1918 - 1938

VTCH between World Wars

  • Military production has been terminated
  • The headquarters of the company moved from Vienna to Chomutov, while subsidiaries have been established in Austria and other European countries
  • The company founded a first cartel agreement with other Czechoslovak producers

1914 - 1918

VTCH during WW I.

  • Factory has been placed under military oversight shifting the manufacturing focus on artillery shells and other military production
  • First women joined factory’s workforce

1898 - 1914

Early years of production of VTCH

  • Focus on growth of the factory by acquisition of new machines, allowing for broadening of the offer
  • Focus on thick-walled pipes for production of canons for the army and navy of the Austro-Hungarian monarchy

1887 - 1898

Establishment of VTCH

  • Establishment of the Mannemsann seamless pipes production in Chomutov
  • Brothers Reinhard and Max Mannesmann invented and patented multiple processes allowing for seamless pipes production
    • Piercing mill with oblique rolling mechanism
    • Hand rolling process on Pilger mill

1870

Establishment of steel mill in Chomutov

The newly established company has purchased several ore mines and steel mill factories in the region with further acquisitions in later years

Products

  • API 5L PSL1
  • API 5LPS
  • ASME SA106
  • ASME SA252
  • ASME SA333
  • ASME SA335
  • ASME SA53
  • ASTM A106
  • ASTM A252
  • ASTM A333
  • ASTM A335
  • ASTM A53
  • DIN 1629
  • DIN 17121
  • DIN 17175
  • EN 10210-1,2
  • EN 10216
  • EN 10225
  • EN 10297-1
  • GOST 19281
  • GOST 8731
  • TU-14-3R-55-2001
  • ČSN 420250
  • ČSN 420251
  • 09G2S
  • 10.20
  • 10CrMo9-10
  • 11353
  • 11453
  • 11503
  • 11523
  • 12 CH1MF
  • 12021
  • 12022
  • 12040
  • 13CrMo4-4
  • 13CrMo4-5
  • 14MoV6-3
  • 15020
  • 15121
  • 15128
  • 15313
  • 15CH1M1F
  • 15CHM
  • 15GS
  • 15Mo3
  • 15NiCuMoNb5-6-4
  • 16Mo3
  • 20
  • 275J0H
  • A
  • B
  • BN
  • C
  • E235
  • E275
  • E275K2
  • E315
  • E355
  • E355K2
  • E470
  • Gr 1
  • Gr 2
  • Gr 3
  • Gr 6
  • P1
  • P11
  • P12
  • P195
  • P195GH
  • P2
  • P215NL
  • P22
  • P235
  • P235GH
  • P265
  • P265GH
  • P265NL
  • P275NL1/NL2
  • P355N/NH
  • P355NL1/NL2
  • P36
  • P5
  • P9
  • P91
  • P92
  • RSt 37-2
  • S235JRH
  • S275J2H
  • S355 G1+N (2009)
  • S355 G14+N (2009)
  • S355 G15+N (2009)
  • S355J0H
  • S355J2H
  • S355K2H
  • S355NH/NLH
  • S355NHHO
  • S355NLHHO
  • S420NH/NLH
  • S460NH/NLH
  • St 37-3
  • St 37.0
  • St 44-2
  • St 44-3
  • St 44.0
  • St 52-3
  • St 52.0
  • St35.8
  • St45.8
  • X10CrMoVNb9-1
  • X42
  • X42N
  • X46
  • X52
  • X52N
  • X52NO
  • X52NS
  • X56
  • X60
  • X60N
09G2S - GOST 19281
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
09G2S - GOST 8731
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
10.20 - GOST 19281
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
10.20 - GOST 8731
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
10CrMo9-10 - DIN 17175
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
10CrMo9-10 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
11353 - ČSN 420250
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
11453 - ČSN 420250
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
11503 - ČSN 420250
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
11523 - ČSN 420250
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
12 CH1MF - TU-14-3R-55-2001
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
12021 - ČSN 420250
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
12022 - ČSN 420250
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
12022 - ČSN 420251
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
12040 - ČSN 420250
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
13CrMo4-4 - DIN 17175
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
13CrMo4-4 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
13CrMo4-5 - DIN 17175
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
13CrMo4-5 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
14MoV6-3 - DIN 17175
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
14MoV6-3 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
15020 - ČSN 420251
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
15121 - ČSN 420251
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
15128 - ČSN 420251
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
15313 - ČSN 420251
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
15CH1M1F - TU-14-3R-55-2001
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
15CHM - TU-14-3R-55-2001
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
15GS - TU-14-3R-55-2001
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
15Mo3 - DIN 17175
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
15Mo3 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
15NiCuMoNb5-6-4 - DIN 17175
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
15NiCuMoNb5-6-4 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
16Mo3 - DIN 17175
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
16Mo3 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
20 - TU-14-3R-55-2001
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
275J0H - EN 10210-1,2
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
A - API 5L PSL1
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
A - ASME SA106
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
A - ASME SA53
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
A - ASTM A106
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
A - ASTM A53
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
B - API 5L PSL1
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
B - ASME SA106
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
B - ASME SA53
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
B - ASTM A106
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
B - ASTM A53
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
BN - API 5LPS
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
C - ASME SA106
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
C - ASTM A106
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
E235 - EN 10297-1
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
E275 - EN 10297-1
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
E275K2 - EN 10297-1
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
E315 - EN 10297-1
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
E355 - EN 10297-1
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
E355K2 - EN 10297-1
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
E470 - EN 10297-1
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
Gr 1 - ASME SA333
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
Gr 1 - ASTM A333
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
Gr 2 - ASME SA252
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
Gr 2 - ASTM A252
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
Gr 3 - ASME SA252
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
Gr 3 - ASTM A252
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
Gr 6 - ASME SA333
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
Gr 6 - ASTM A333
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P1 - ASME SA335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P1 - ASTM A335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P11 - ASME SA335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P11 - ASTM A335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P12 - ASME SA335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P12 - ASTM A335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P195 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P195GH - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P2 - ASME SA335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P2 - ASTM A335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P215NL - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P22 - ASME SA335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P22 - ASTM A335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P235 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P235GH - DIN 17175
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P235GH - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P235GH - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P235GH - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P265 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P265GH - DIN 17175
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P265GH - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P265GH - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P265GH - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P265NL - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P275NL1/NL2 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P355N/NH - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P355NL1/NL2 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P36 - ASME SA335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P36 - ASTM A335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P5 - ASME SA335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P5 - ASTM A335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P9 - ASME SA335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P9 - ASTM A335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P91 - ASME SA335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P91 - ASTM A335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P92 - ASME SA335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
P92 - ASTM A335
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
RSt 37-2 - DIN 17121
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
RSt 37-2 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
S235JRH - EN 10210-1,2
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
S275J2H - EN 10210-1,2
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
S355 G1+N (2009) - EN 10225
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
S355 G14+N (2009) - EN 10225
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
S355 G15+N (2009) - EN 10225
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
S355J0H - EN 10210-1,2
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
S355J2H - EN 10210-1,2
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
S355K2H - EN 10210-1,2
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
S355NH/NLH - EN 10210-1,2
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
S355NHHO - EN 10225
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
S355NLHHO - EN 10225
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
S420NH/NLH - EN 10210-1,2
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
S460NH/NLH - EN 10210-1,2
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
St 37-3 - DIN 17121
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
St 37-3 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
St 37.0 - DIN 1629
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
St 44-2 - DIN 17121
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
St 44-2 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
St 44-3 - DIN 17121
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
St 44-3 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
St 44.0 - DIN 1629
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
St 52-3 - DIN 17121
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
St 52-3 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
St 52.0 - DIN 1629
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
St35.8 - DIN 17175
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
St35.8 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
St45.8 - DIN 17175
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
St45.8 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
X10CrMoVNb9-1 - DIN 17175
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
X10CrMoVNb9-1 - EN 10216
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
X42 - API 5L PSL1
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
X42N - API 5LPS
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
X46 - API 5L PSL1
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
X52 - API 5L PSL1
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
X52N - API 5LPS
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
X52NO - API 5LPS
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
X52NS - API 5LPS
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
X56 - API 5L PSL1
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
X60 - API 5L PSL1
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us
X60N - API 5LPS
  • standard
  • on request
  • not offered
  • In case the specification you require is not offered, please do contact our sales team. We will gladly help you.
  • Specific lengths
  • Bevelling
  • End caps
  • Painted surface
  • Cut from the outside
  • Cut from the inside
  • Stained
  • Ultrasound
Contact us

Jobs

If you find yourself fulfilling our criteria, do not hesitate
and send your CV with a motivation letter to careers@vtchomutov.com

System and product certificates

System

  • EN ISO 9001
  • EN ISO 14001
  • API Spec. Q1
  • EPD ENVIRONMENTAL
    PRODUCT DECLARATION

 

Norms

  • Seamless carbon steel tubes:
    standards EN / DIN / GOST / ČSN
    API Spec. 5L / ASTM / ASM
  • Seamless boiler steel tubes:
    standards EN / DIN / ASTM / ASME / TU / ČSN

Product

  • API Spec. 5L
  • BV BUREAU VERITAS Marine
  • DNV-GL Det NORSKE VERITAS-GERMANISHER LLOYD
  • LR LLOYD’S REGISTER
  • ABS AMERICAN BUREAU OF SHIPPING Marine
  • CPR CONSTRUKTION PRODUCTS REGULATION – EN 10210-1
  • AD 2000 W0
  • PED PRESURE EQUIPMENT DIRECTIVE – 2014/68/EU
  • TR TS - Сертификат соответствия Техническим регламентам Таможенного Союза (ТР ТС)
  • Zakluchenie 15GS (14-3R-55-2001)
  • Zakluchenie 20, 12Ch1MF, 15Ch1M1F (14-3R-55-2001)

Contacts

Válcovny trub Chomutov, a.s.
Kollárova 1229
698 01 Veselí nad Moravou
Česká Republika

IČ: 227 74 645
DIČ: CZ22774645

Společnost je zapsána u Krajského soudu
v Ústí nad Labem oddíl B, vložka 2228

Plant Address:
Tovární 629
430 01 Chomutov
Česká Republika

 

General Information
info@vtchomutov.com

+420 474 64 33 01

Sales Department
sales@vtchomutov.com

EN
Tomas Valenta
+420 602 148 570
RU
Ludmila Kondratieva
+420 602 292 778

    Contact us

    Please do complete all fields to contact us.
    sales@vtchomutov.cz

      Zavřít

      Position - Sales Manager

      Your key responsibilities will be to maintain the relations with existing clients and seek new opportunities within the region you will be responsible for. We expect a result-oriented aptitude with desire to achieve and exceed set goals. On daily basis you will be given the opportunity to manifest your ability to focus on the task at hand and deliver it together with a great team of experienced professionals, leading to the success.

      Scope of role

      • Account management
      • Business opportunities acquisition
      • Order pricing and processing

      You

      • Must have an experience in the sales of technical products – preferably seamless steel pipes (or similar type of product or service)
      • Knowledge of tubular products (ideally hot worked seamless pipes) is expected, but not essential
      • Should have the experience and ability to boost sales within your scope / area
      • Have ability to drive the sales process from plan to close
      • Do have the ability to communicate, present and influence credibly and effectively
      • Are fluent in English. Knowledge of other languages (preferably German or Russian) is a benefit

      Where to send CV

      If you find yourself fulfilling our criteria, do not hesitate and send your CV with a motivation letter to

      careers@vtchomutov.com

      Zavřít